How to use

Spray On

1. Spray On

Thoroughly cover a section of your car with GlossPro Wash&Wax.

Wipe Off

2. Wipe Off

With your GlossPro Microfiber Towel, wipe in one direction, collecting dirt and grime as you go.

Rotate the cloth after each pass so that you are using a clean section each time.

Polish Off

3. Buff In

Use a clean, dry GlossPro Microfiber Towel to buff the car to a shiny luster.

If the Wash&Wax has already dried, simply spray a tiny amount of GlossPro Wash&Wax on the Microfiber Towel first.

GlossPro Car Wash safely and gently cleans your car while leaving a protective Carnauba Wax shine.

GlossPro Car Wash is an environmentally sound, bio-degradable product that preserves the environment by saving between 50 and 75 gallons of water each time you wash your car.

Hints for a successful wash:

  • Only Microfiber Towels should be used with this product. We recommend GlossPro Microfiber Towels for best results.
  • If your vehicle is caked with mud, salt or wet sand you may need to rinse with water first.
  • Shake often. Pump the spray nozzle as often as needed to ensure a consistent and continuous spray. For a finer mist, adjust the nozzle by turning it clockwise.
  • The surface to be cleaned should not be hot. If your car has been sitting in the sun and is very hot to the touch, move to the shade. and allow to cool first. GlossPro products will never harm your car's surfaces. However, a hot surface may cause the products to dry too fast and possibly streak.
  • Use GlossPro Glass Cleaner for windows and chrome surfaces.
  • Use GlossPro Vinyl Protectant for all interior finishes, including vinyl, plastic, and leather.
  • Use GlossPro Tire Shine for all rubber surfaces, not just tires!
  • Re-fill your Pressure Sprayer using GlossPro Wash&Wax Concentrate for the most economical wash.